Tare station EST-03 Professional
A fully automatic mobile dispenser is designed for calibrating tanks, containers, barrels by service specialists of installation teams. The column is equipped with mechanisms for precise filling of the dose. The amount of fuel is entered from the keyboard. The station has a LED display based on seven-segment indicators for displaying parameters and emergency warnings, as well as LED indication of equipment operation. Data on the dispensed fuel comes from a fuel meter with a pulse output. The station controls the solenoid valve and the pump motor. Connection of external fuel level sensors is provided. This device allows you to set the total spill volume, dose, pause between spills, after starting it performs calibration in a fully automatic mode, after which, the FLS readings can be received both on a computer and on a phone.
Functionality of the tare station:
• Autoflow (work with a given dose and a given pause)
• Improved mechanical and electronic calibration functions
• Bipper, marking, for example, the stop and / or start of the strait
• USB output (for digital data capture)
• Input R S485 for connecting FLS (up to 4 pieces)
• Ability to update the firmware (programmer included)
• Connecting a BLE convector with data output to a mobile application of an Android smartphone
The station has constructive solutions:
• Carry handles
• Entrance for fuel hose 25mm • Outlet for fuel delivery also 25mm
• A box with a contactor for starting the engine with a built-in fuse
• Keyboard for dialing portions and programming
• ETR contact for connecting a programmer or Bluetooth
• LLS contact for connecting fuel level sensors (up to 4 pieces)
• Emergency stop button
* It is advisable to use a very rigid hose at the inlet so that it does not stick together when pumping fuel, as the pump causes a vacuum in the hose.
Product Specifications:
• Power supply 220V (option for 24V and 12V is possible)
• Fuel - diesel by default, gasoline available on special order
• Calibration station dimensions 360×320×710mm
• Weight 40 kg • Fuel flow rate 65 liters per minute.
• Relative error in calculating and displaying the volume of dispensed fuel ± 0.25%
• Connection diameter 25mm
• Operating temperature range -40°С +50°С degrees
• Maximum power consumption 1000 W
• LLS fuel sensor type with Omnicomm protocol
• Connection to satellite monitoring systems. (Optional) GPS/GLONASS/GPRS
Equipment:
• Collapsible Piusi coarse filter (with simplified debris removal)
• Digital EFR Fuel Delivery Controller Assembly
• Enhanced fail-safe kit
• Pump ADAM PUMPS RA1 70 (220V, 70 l/min)
• Volume meter VT-60
• Pulse transmitter for Ex volume meter
• Valve of double action MSF-25 (220 V).
* The station can be located outdoors, but it is desirable to place it under a canopy or inside a car.
Please note that ECT-03 Professional can be retrofitted for additional ease of use and accuracy of fuel control, and can also be used as a filling dispenser with dose output:
1. DN-25 series EX-Air Separator (to prevent air from entering the fuel).
2. BLE controller, allowing you to connect your Android smartphone
3. Card reader (for fuel delivery control)
4. Fine filter 5. GPS tracker for:
• - transfer of data on fuel dispensing to the monitoring system
• - integration into 1C
• - receiving data from the total counter (required when organizing integration with 1C)
• - fixation of FLS indicators
• - remote control of fuel dispensing via port 485
More information in our video reviews:
EST-03 Professional
Gas separator
BLE controller
BLE controller + software
Care station EST-03 Professional (end face)
A fully automatic mobile speaker that repeats all the characteristics of the EST-03 Professional, with design changes for ease of use. This specialized station (end) is a modification for installation on cars in a stationary version or under conditions when the control of the station located from above is impossible or creates difficulties.
The compactness and convenience of the location of the controls of the station allows it to be placed inside the car along with the container, thereby ensuring mobility.
Calibration station EST-02.1 MINI (12V / 220V)
A new, small-sized mobile container calibration station with a total meter for 12V or 220V. The column is equipped with mechanisms for precise calibration of the filling of the dose. This station model is equipped with two fuel indicators. The first fuel indicator (resettable by the button) allows you to monitor the total amount of spillage during calibration, the second indicator controls the fuel dosage. Data on the dispensed fuel comes from a fuel meter with a pulse output. The station controls a solenoid valve and an electric pump.
Functionality of the tare station:
• Auto spill with a given dose.
• Separate indicators of the amount of spillage and dosage.
Product Specifications:
• Power supply 12V or 220V • Fuel - diesel.
• Calibration station dimensions height/width/depth 435x570x310mm
• Weight 30 kg
• Fuel flow rate 50-65 liters per minute.
• Relative error in calculating and displaying the volume of dispensed fuel ± 0.25%
• Connection diameter 25mm
• Operating temperature range -40°С +50°С degrees
• Maximum power consumption 400 W Equipment:
• Check valve • Linear coarse filter Piusi
• Enhanced fail-safe kit
• Digital fuel metering indicator EFD-02 • Pulse counter SI20-U.Shch2.R
• Fuel transfer pump "Mercury" 12 V, "BelAK" / Pump ADAM PUMPS RA1 70 (220V, 70 l/min)
• Volume meter Bennet RSJ-50
• Pulse transmitter for Ex volume meter
• Valve of double action of MSF-25 fuel dispenser (24 V) / (220 V).
* 12V pumps are not designed for continuous operation without stopping and require a pause of 5 minutes every 2 hours of operation.
More information in our video reviews:
Care station EST-02 MINI (mobile)
The most compact Exotron in the line of equipment, a mobile station for calibrating tanks and containers. Lightweight portable calibration station, the size of a briefcase and weighing up to 10 kg, is perfect for emergency service teams to work in remote areas: field, quarry, highway, construction area, etc. Semi-automatic mini-station - set the dose and use the "Start" button to fill in exactly the specified value.
The station allows you to perform calibration quickly and accurately, with an accuracy of readings at the level of 0.5%, which are the maximum indicators for meters of this class. The presence of two filters protects against ingress and sticking of metal dust on the magnets inside the meter.
Product Specifications:
• Power supply 12V • Fuel flow rate 30 liters per minute
• Relative error in calculating and displaying the volume of dispensed fuel ± 0.5%
• Fuel - diesel.
• Possibility to set the dose I pour
• Reverse polarity protection. • Voltage protection 24 volts.
• Resettable fuse. • Two filters. Fine and coarse filter.
• High quality 100 amp relay with silver plated contacts.
• Calibration station dimensions 410×320×420mm
• Weight 8 kg • Connection diameter 20mm
• Operating temperature range -20°С +50°С degrees
• Maximum power consumption 300W
• Fuel sensor type LLS Equipment:
• Check valve TIM reinforced 1/2" (lat. stock)
• Linear coarse filter Piusi
• Filter TIM JH1002 1/2" with stopcock and manometer with glass bulb
• Enhanced fail-safe kit
• Pulse counter SI20-U.Shch2.R
• Portable diesel pump CARRY 3000 12V/ (50l/min)
• Counter K400 PULSER 1/2" pulse 1-30l/min70bar
• Electromagnetic relay 412.3787 12v.
* Please note that the pump uses swivel (movable) connections, which simplifies filter cleaning by removing the fitting and turning the filter on the hinge by 90 degrees.
More information in our video reviews:
EST-02 MINI (mobile)
