Advantages:
• In the tilt angle measurement mode, the sensor transmits angle X, angle Y, angle Z, number of events, number of event chains, temperature to the monitoring system
• In the control mode of the concrete mixer, the sensor waits for installation on a rotating drum and begins to measure the rotation speed relative to one of the axes and the direction of rotation.
• In the boom operation control mode, the current status of special equipment (working-not working) and the total accumulated operating time are transmitted to the monitoring terminal.
Name of the parameter Value
The operating frequency of the 2.4GHz radio channel
Supply voltage 3 ... 3.7V
Bluetooth Low Energy Data Exchange Interface (BLE)
Receiver Sensitivity/Transmitter Power -96 dBm / +4 dBm
Data exchange protocol Advertising packages, description attached
Range (under normal operating conditions in the absence of interference and obstacles when working with the base), at least 10 meters
The measurement error of the tilt angle is ± 1°
Temperature measurement error ±1°C
Number of event logger records (for models with the M index) 900
Ambient temperature – 40 ... + 85 0C
The degree of protection of the shell is IP67
Overall dimensions, not more than 100 x 54 x 34 mm
Weight, not more than 0.3 kg
Pay attention to the possibility of measuring various deviations of the object – measurement is possible only if the position of the sensor changes relative to the gravity vector
In addition to measuring the angles of inclination, the sensor independently determines Events and Chains of events. The event is when the corner goes beyond the specified boundaries. You can set up one event for each of the axes (X,Y,Z). When an event is committed, the event counter is incremented by one. A chain of events is the fulfillment of the conditions of a sequence of events separated by time intervals. For each of the events, the angle measurement axis, the angle value, and the type of comparison (<, >) are set. The maximum waiting time for the following condition is also set
