Float magnetic transducer PMP-201E-Fl.2-80-25

Description

The housing is manufactured is alluminium alloy AlSi7 with fluoride oxide electroconductive coating and powder-coated (might be manufactured of stailess steel as per Customer’s request). External grounding clamp, single or two cable entries. Can be completed with various cable protection sheaths fixture units. Electric board with terminals is placed inside the protective housing. The access to the board is provided with removable lid.

Tank fixture fitting is manufactured according to Customer’s requirements.

The sensing element with temperature sensors (up to 8 pcs.) is placed inside stainless steel guide-pipe. Floats (max. 3) travel along the guide pipe. For aggressive media usage floats and protective sheaths of cables might be manufactured of PVDF.

Liquid level measurement is based on magnetostriction effect. A pulse of current is transmitted via acoustic duct made of magnetostrictive material, forming magnetic field around acoustic duct. A pulse of elastic deformation occurs in the place of magnetic float location. Liquid level is determined by time interval required for the pulse to spread. Multi-point measurement of temperature is provided by integral temperature sensors. Density measurement is performed with an additional float, the immersion depth of which depends on liquid density.

The liquid volume is automatically calculated using the calibration table or calibration formulas (for tanks with simple geometrical forms).

Calculation of product weight and volume is executed according to the approved methods.