Fuel dispenser EFL-BOX – the most convenient equipment for gas stations because it has a height of only 90 cm, weight 37 kg and 220 volt power! The design of this fuel transfer module is vandal-resistant, and the lockable outer door securely hides the indicator, fuel dosing keypad, plastic card reader and control buttons. Therefore, the EFL-BOX can be used as a gas station dispenser for dispensing fuel at limits even in fields, forest plots and quarries outside a protected area.
Convenient gas station EFL-BOX is based on a standard mechanical filling kit for diesel and gasoline with a volume meter like standard Topaz, Nara, Livenka, etc. dispensers, but unlike them, it uses a single-phase pump, which is smaller, lighter and more simple in connection. Therefore, such a complete set of fuel equipment is usually used at departmental gas stations. Also, unlike standard fuel dispensers, an Exotron fuel dispensing control and monitoring unit is used with data transfer to accounting and monitoring systems. This block was developed in 2018 and includes, in addition to the standard display and buttons, a keyboard for entering the fuel dose, a plastic card reader for identifying the recipient using fuel cards, and a satellite monitoring device for accounting for fuel dispensing.
You can buy an EFL-BOX fuel dispenser in the standard configuration: with a diesel or gasoline meter, but with a 220V Piusi fuel pump for diesel fuel, with a double-circuit valve for dispensing fuel delivery and with a Piusi fuel coarse filter. In this fuel dispensing unit, it is possible to install another pump on request – with a different voltage or suitable for gasoline, as well as add a fine filter for contaminated fuel. It is also possible to additionally equip the EFL-BOX filling station with a fuel hose and a fuel gun.
Any configuration of the EFL-BOX fuel transfer station includes an Exotron fuel metering panel with the possibility of limits fuel dispensing and control of a dual-circuit fuel valve as in commercial gas stations for accurate filling. As well as ETR and LLS inputs for connecting level sensors and displaying the amount of fuel in the capacity of the gas station from where we refuel, and the Galileo 5.0 glonass device for transmitting data on refueling to 1C or to the GPS glonass system, which is necessary for a departmental column. Therefore, the EFL-BOX fuel dispensing equipment does not require further modifications and is completely ready for high-quality accounting of fuel dispensing.
Main characteristics < strong>Fueling station with EFL-BOX fuel:
- Power supply 220V single-phase.
- Fuel dispensing rate 65 liters per minute.
- Piusi reusable fuel pre-filter
- Dual-circuit fuel valve for accurate filling up to 20 grams.
- High fail-safe kit. < li>Temperature range from minus 40 to plus 50.
- The presence of illumination.
- Possibility of placement in the open air.
- Safe type design. < li> Weight 40 kg. Dimensions 38D*46W*90H.
- Fuel type diesel.
Functionality:
Diesel fuel filling kit as popular High-precision calibration station EST-03 professional and Mobile fuel dispenser EFL, but in a safe type and with a more powerful fuel pump:
- Pre-installed Autonomous filling system
- Presence of current and total counters.
- Quality functions of mechanical and electronic counter calibration .
- Beeper for starting and stopping fuel dispensing.
- RS485 input for connecting up to 4 fuel level sensors.
- Ability to control dispensing using RFID plastic fuel cards ( online/offline).
- Ability to remotely program maps, absolute and daily fuel limit.
- Web interface for reporting.
- Ability to upload data to 1C accounting.
Basic equipment:
- Piusi reusable fuel pre-filter
- ADAM PUMPS PA1 70 pump < /li>
- VT-60 volume meter
- Pulse generator
- Double-circuit valve
- Control panel with a card reader similar to EFL 6.0 V1
Fuel hose, dispense gun and fine filter are optional.